Showing posts with label craftsman. Show all posts
Showing posts with label craftsman. Show all posts

4/28/2012

Original Sears Craftsman Husqvarna Part # 418168 AXLE ASM.WEL Review

Original Sears Craftsman Husqvarna Part # 418168 AXLE ASM.WEL
Average Reviews:

(More customer reviews)
I purchased this item to fix my mower and it was a perfect match. Works very well and the cost was below anywhere else I could find. Well built item and I don't see any future issues with this. Well pleased.

Click Here to see more reviews about: Original Sears Craftsman Husqvarna Part # 418168 AXLE ASM.WEL



Buy Now

Click here for more information about Original Sears Craftsman Husqvarna Part # 418168 AXLE ASM.WEL

Read More...

4/16/2012

12.5 Cu. Ft. High Impact Plastic Lawn and Garden Dump Cart Review

12.5 Cu. Ft. High Impact Plastic Lawn and Garden Dump Cart
Average Reviews:

(More customer reviews)
ASSEMBLY: I found assembly of this cart quite difficult for one person to accomplish. I was able to handle some of it by myself, but when it came to mounting the polly cart to the frame, I needed a second person. This is because the cart is so big, that you can't reach your hand over to hold the bolt in place, while you are slipping on the nut, underneath the outside of the cart.
NOTE: The instructions do state you need two people to assemble this, they aint kidding!
WEIGHT: I recently used this cart to haul at least 1200-pounds worth of gravel in "two loads" of course. Since gravel weighs a lot, I did not want to overload the cart so I did not fill it up heaping. I have to say, I'm impressed as the axle never bent, and nor did the tires deflate. In other words, I truly believe this cart can be loaded to its rated weight capacity of any type of material.
HAULING: I have also used this cart to haul away yard waste, if you liked your wheel barrel before for that sort of thing, your really going to like this! It holds so much more then your wheel barrel and can reduce your amount of trips to your compost pile by 50%. And because of its dump mechanism, weather yard waste or other material, makes unloading a breese.
CONCLUSION: Remember, when you go to assemble this dump cart, make sure you have a second person available. Also, do not forget to inflate the tires before each use, to at least 15-PSI. And, do not exceed the weight capacity of tires and cart together. Furthermore, if you do all that, plus grease the bearings once per year, you should not have any problems with this cart. I think these are better then the steel models and I do not have any regrets.
TIP: If you ever puncture the tires, Fix-A-Flat is the product to use to get you going again without the need of replacing the whole tire!
UPDATE! 2009
Its been nearly two years since I purchased this pull behind polly/dump tractor cart. There is some noticable cosmetic damage inside the cart due to it being polly/plastic, but cosmetics in no way impede its performance to get the job done.
I find this cart is holding up quite well, there are no holes, cracks, or breaks of any kind in the plastic. And the metal framework which holds the cart all together is also in excellent condition. The axel is still in good condition and so are the tires.
The only thing with the tires is that you have to remember to pump them up each time you use your hauling cart for a job. I have used it to haul gravel, dirt, and yard waste and have had no issues with it what so ever.
NOTE: Sears still sells these but they no longer have the Craftsman logo on them. Sears labels them as universal dump carts.

Click Here to see more reviews about: 12.5 Cu. Ft. High Impact Plastic Lawn and Garden Dump Cart



Buy Now

Click here for more information about 12.5 Cu. Ft. High Impact Plastic Lawn and Garden Dump Cart

Read More...

4/13/2012

Poulan Pro PP40003 6-Pack Of Snow Thrower Sheer Pins & Bolts Review

Poulan Pro PP40003 6-Pack Of Snow Thrower Sheer Pins and Bolts
Average Reviews:

(More customer reviews)

This shear bolt / pin with a shoulder replaced Sears Craftsman part # 760875.
I used them on a Sears Craftsman 22" auger 5hp Snow thrower # 536.886140
It's 1/4"-20 x 1.75 in overall size including shoulder but not the cap.
It's 1.50" from the bottom of the shoulder to end of threads.
It's 7/8" from the bottom of the shoulder to start of threads.
I had to modify by adding 3/16" more thread with a 1/4-20 die so that I could tighten bolt better.
The Nylon edge self locking metal nuts worked fine.
All in all they worked perfectly.

Click Here to see more reviews about: Poulan Pro PP40003 6-Pack Of Snow Thrower Sheer Pins & Bolts

Will fit model No. PR524, PR5524ES, PP10530ES, and PP1130ES. 3 sets of 2 per package.

Buy NowGet 55% OFF

Click here for more information about Poulan Pro PP40003 6-Pack Of Snow Thrower Sheer Pins & Bolts

Read More...

3/19/2012

Craftsman Part # 146154, Solenoid Review

Craftsman Part # 146154, Solenoid
Average Reviews:

(More customer reviews)
This seems to be the same thing as on so many old FoMoCo cars and trucks! Cheap part, first one lasted since the tractor was new, so since 2001. I'm sure this one will last another 9+ years. Delivery was fast, product works. What more is there to say?

Click Here to see more reviews about: Craftsman Part # 146154, Solenoid



Buy Now

Click here for more information about Craftsman Part # 146154, Solenoid

Read More...

3/13/2012

Original Sears Craftsman Husqvarna Part # 187281 HOUSING,MANDREL 4PT Review

Original Sears Craftsman Husqvarna Part # 187281 HOUSING,MANDREL 4PT
Average Reviews:

(More customer reviews)
I live on a rocky terrain and constantly crack these housings while mowing...
this is THE SAME ITEM as sold by sears direct parts....
far less expensive!
I also have purchased the pre-assembled with the lower bearings and
shaft assembly already installed in the housing...
It is far lower in price.....then sears parts direct... for the same item...
Be Smart... Be Like Me... Buy with Confidence...


Click Here to see more reviews about: Original Sears Craftsman Husqvarna Part # 187281 HOUSING,MANDREL 4PT



Buy NowGet 34% OFF

Click here for more information about Original Sears Craftsman Husqvarna Part # 187281 HOUSING,MANDREL 4PT

Read More...

2/25/2012

Genuine FSP Ignition Switch 175566 Review

Genuine FSP Ignition Switch 175566
Average Reviews:

(More customer reviews)
When my kid jammed mud into my old ignition switch, I strongly suspected that was the source of my mower starting issues. Nevertheless, I yielded to the methodical diagnostic processes of the experts. Ultimately all other possibilities had been eliminated and the experts finally agreed that it was time to look at the ignition switch. A few dollars later and an EASY swap out, my mower started right up. I should have gone with my gut in the first place. (I had even told the experts about the mud.) This switch fit the bill and the price was terrific.

Click Here to see more reviews about: Genuine FSP Ignition Switch 175566



Buy Now

Click here for more information about Genuine FSP Ignition Switch 175566

Read More...

2/24/2012

MTD LAWN MOWER PART # OEM-738-04124 SHEAR PINS QTY 4 Review

MTD LAWN MOWER PART # OEM-738-04124 SHEAR PINS QTY 4
Average Reviews:

(More customer reviews)
These shear pin sets come with cotter pins, which means you don't have to buy separate hold on clips. The shipping and handling was a little pricy, but overall it was the best deal I could find.

Click Here to see more reviews about: MTD LAWN MOWER PART # OEM-738-04124 SHEAR PINS QTY 4



Buy NowGet 55% OFF

Click here for more information about MTD LAWN MOWER PART # OEM-738-04124 SHEAR PINS QTY 4

Read More...

2/17/2012

Precision Products LC1700GY 17-Cubic Foot Trailer Dump Cart Review

Precision Products LC1700GY 17-Cubic Foot Trailer Dump Cart
Average Reviews:

(More customer reviews)
ASSEMBLY TOOK ABOUT 1 HOUR...IT WAS TRICKY TO DO BY MYSELF BUT I MANAGED. THE CART IS VERY STURDY AND I PUT ABOUT 600 LBS OF STONE IN IT AND HAD NO PROBLEMS. IT IS WELL MADE. I DO WISH THE WHEELS HAD A GREASE FITTING. FROM ORDERING TO ARRIVING AT MY HOME TOOK ABOUT 10 DAYS. IT WAS DELIVERED BY CEVA AND THIS WENT OFF WITHOUT A HITCH. I WOULD DEFINITELY BUY THIS AGAIN.

Click Here to see more reviews about: Precision Products LC1700GY 17-Cubic Foot Trailer Dump Cart

The Precision Products LC1700GY 17-cubic foot trailer dump cart is a handy tool for many purposes around the yard or farm. The large and strong cart, designed for trailing behind a tractor, holds up to 1,500 pounds for big loads. It's ruggedly constructed, and features a heavy-duty 16 gauge powder-coated steel bed (measuring 58 by 34 by 14-3/4 inches), rests on a 3/4-inch solid steel axle for strength and reliability, and sports two 16-inch pneumatic turf tires on steel wheels for covering even the most uneven terrain in challenging conditions. Dumping is as easy as pulling the dump latch toward your mower or trailer. The cart is covered by a 90-day limited warranty, and some assembly is required.--Jeffrey Dalto

Buy Now

Click here for more information about Precision Products LC1700GY 17-Cubic Foot Trailer Dump Cart

Read More...

2/15/2012

Original Craftsman, Poulan, Husqvarna Flat Idler Pulley Part Number 173438, 131494. Review

Original Craftsman, Poulan, Husqvarna Flat Idler Pulley Part Number 173438, 131494.
Average Reviews:

(More customer reviews)
Glad I found this online beats the hell out of loading tractor and taking it to sears , which means they would have had the tractor for months for a simple repair. Also need to replace the belts , again , found them here online thru this same company. Couldn't ask for better. My advice for anybody looking to buy a new tractor, stay away from the craftsman. The decks and pulleys just don't hold up like their tools do. If you already have one like I do you might want to consider replacing worn parts with the heavy duty ones. This company is the place to do it also, very happy with the service and the quick shipping.

Click Here to see more reviews about: Original Craftsman, Poulan, Husqvarna Flat Idler Pulley Part Number 173438, 131494.



Buy NowGet 99% OFF

Click here for more information about Original Craftsman, Poulan, Husqvarna Flat Idler Pulley Part Number 173438, 131494.

Read More...

2/13/2012

Original Sears Craftsman Husqvarna Part # 192872 SHAFT.ASM.MD Review

Original Sears Craftsman Husqvarna Part # 192872 SHAFT.ASM.MD
Average Reviews:

(More customer reviews)
Shipped fast, though I ordered 2, and only recieved one. Called the company, and they sent another immediately no questions asked. Great customer service. Well, this "original" part has a shaft that was a little too short, and had a different bolt hole size. So a couple trips to the store for washers and bolts, and I was ready to install them. I got them on, and had to adjust and adjust and adjust these things due to the shaft size being wrong. I finally got the right comination of washer and got it all together, and it worked good for a few months. Yesterday, my wife says the deck is broke again, so I check it out. The bolt somehow tighted up and cracked the mandrel housing. So I will be purchasing new mandrels, shafts, pulleys and a belt from someone else.

Click Here to see more reviews about: Original Sears Craftsman Husqvarna Part # 192872 SHAFT.ASM.MD



Buy NowGet 27% OFF

Click here for more information about Original Sears Craftsman Husqvarna Part # 192872 SHAFT.ASM.MD

Read More...

2/07/2012

Craftsman Part # 130969, V-Belt Mower 42" 9 2 40 Review

Craftsman Part # 130969, V-Belt Mower 42 9 2 40
Average Reviews:

(More customer reviews)
I ordered this part and the supplier sent it immediately. I am very satisfied with the quality of it. Thank you for your great service. I will definitely repeat my purchases with you.

Click Here to see more reviews about: Craftsman Part # 130969, V-Belt Mower 42" 9 2 40



Buy Now

Click here for more information about Craftsman Part # 130969, V-Belt Mower 42" 9 2 40

Read More...

2/03/2012

Lawn Mower Spindle Assembly Replaces AYP/ROPER/SEARS 130794 Review

Lawn Mower Spindle Assembly Replaces AYP/ROPER/SEARS 130794
Average Reviews:

(More customer reviews)

This product was an exact replacement for the original.
I have replaced the old part with this part and have
since ran my mower. Everything is running very smoothly
and part is functioning as it should. I am very happy
with the part, price, and the fast shipping from the
supplier.

Click Here to see more reviews about: Lawn Mower Spindle Assembly Replaces AYP/ROPER/SEARS 130794



Buy Now

Click here for more information about Lawn Mower Spindle Assembly Replaces AYP/ROPER/SEARS 130794

Read More...