Showing posts with label yard. Show all posts
Showing posts with label yard. Show all posts

5/06/2012

Agri-Fab 45-0211 125-Pound Tow Broadcast Spreader Review

Agri-Fab 45-0211 125-Pound Tow Broadcast Spreader
Average Reviews:

(More customer reviews)
Have used this spreader for 12 years to spread fertilizer, sand, & seed on 3 acre plot. Spreads very evenly, doesn't clog easily, is easy to clean (just hose off) and very corrosion resistant. Depending on the material, the broadcast spread is 8-12 ft. I spread around 350 pounds of organic fertilizer twice a year and this spreader makes that very easy.
Construction: All metal pieces that contact the fertilizer are stainless steel. Fasteners look like they are zinc plated. Uses standard pneumatic tires. Sturdy, durable non corroding plastic hopper. (no signs of UV cracking after all this time...)
Suggested product improvement would be to add zerk fittings on axle sleeves to make it easier to grease.
Only complaint is that the control settings don't correlate to any major fertilizer brands (Scotts, Earthway, etc.). As a result you need to set application rate by trial and error.

Click Here to see more reviews about: Agri-Fab 45-0211 125-Pound Tow Broadcast Spreader



Buy Now

Click here for more information about Agri-Fab 45-0211 125-Pound Tow Broadcast Spreader

Read More...

4/21/2012

Toro 51500 Universal Leaf Collector with 8-Foot Hose Review

Toro 51500 Universal Leaf Collector with 8-Foot Hose
Average Reviews:

(More customer reviews)
There are three primary points of failure, and if you are not suspecting, you will quickly find them all.
The hose fits into a canvas sheet that will, in turn, fit over the Toro collapsing bin. The fit is achieved by pulling a drawstring and closing the bin. While in vacuum mode, there is considerable air pressure from the vac into the bag.
The first failure is that the draw is simply not enough to hold the canvas to the bin while the vac is operating. After having it pop off a dozen or so times, I came up with the idea of *clamping* the bag to the bin, using, of all things, automobile jumper cables. This worked, but the loose fit still allowed bits of leaves to be ejected around the lid.
The second point of failure is the hose - it is simply inserted into the canvas, and is held in place only by an elastic band inside the canvas sheet. Anyone who has ever messed with venting a dryer knows this simply will not work - and the air pressure here is much higher (not to mention the additional effect of the flying debris). With the lid finally secured by clamps, the hose kept popping out of place, further spewing leaf debris everywhere. The fix for this is some kind of cable tie, like what you would find on a dryer vent. Having none at hand, I simply used about a half roll of duct tape and put an end to that issue.
The third point of failure is that the hose has a small diameter and can get clogged up fast. During operation, you must make sure the hose is as straight as possible, as any kinks will cause debris to collect inside the hose.
These problems made a very difficult afternoon of it, having to stop and spend an hour or so re-engineering the equipment. I would not recommend it for that reason. Honestly, do people ever test these things before they start selling them?
GRADE: F.


Click Here to see more reviews about: Toro 51500 Universal Leaf Collector with 8-Foot Hose

"TORO" LEAF COLLECTING SYSTEM Designed to integrate with your existing blower vac and trash receptacle Universal coupler Includes mesh top which fits tightly around most debris containers 8 ft. hose Retailer request for blower vac accessories

Buy NowGet 25% OFF

Click here for more information about Toro 51500 Universal Leaf Collector with 8-Foot Hose

Read More...