Average Reviews:
(More customer reviews)If you have a very large job to do you may want to look at a bigger disc harrow. I had about 5000 sq. ft. so it was big enough for me. The product assembled easily and is very well made. Each set of four discs (there are two sets) has an adjustment for the angle and spacing between the sets. The discs are assembled onto a large shaft and are separated by spacers one of which is the bearing journal for the shaft assembly. There is a grease fitting on each bearing journal to prevent wear.
You will should have a Brinley type hitch on your tractor so the harrow can be raised off the ground for transport. On top of the harrow there is a tray which will hold two concrete blocks for weight. I used 8"x16"x4" solid blocks (about 40 lbs each). It worked very well but it might even work better with more weight (8"x16"x8" solid). I don't know if that is a standard size but it can easily be made filling a regular concrete block with cement. I'd cement in a bent rod to use as a handle so it will be easier to lift the blocks.
Your tractor will know your pulling it so be sure you have enough power. If you don't have plenty of power use less weight.
"Order Tree" was the vendor I purchased it from on Amazon.com. They are excellent with good communication and fast shipping. I had the item in a few days. I would highly recommend them.
Click Here to see more reviews about: Agri-Fab Ground-Engaging Attachment Sleeve Hitch Disc Cultivator 45-0266
Get more use out of your garden tractor with serious gardening cultivation. Square steel tubing frame can be used as a weight tray for added ground breaking penetration. The disc cultivator includes a tandem hitch for adding another cultivator. Requires assembly. U.S.A. Application: Cultivator, Working Width (in.): 30 - 38, Disc Diameter (in.): 11
No comments:
Post a Comment